Point-to-Point Protocol (PPP)
Point-to-Point Protocol (PPP) is a protocol for linking two systems together directly. Learn how PPP sets up a link, how it handles authentication, how it relates to PPPoE and PPTP, and where it is still used today.
What is Point-to-Point Protocol (PPP)?
Point-to-Point Protocol (PPP) is a data link layer protocol that creates a direct connection between two nodes, such as a computer and an internet provider's equipment, or two routers over a leased line. It was widely used for dial-up internet access and remains part of many broadband connections through PPP over Ethernet (PPPoE). PPP carries network-layer traffic, most commonly IP, over the link.
How does PPP work?
A PPP connection is set up in phases:
- Link establishment: the Link Control Protocol (LCP) negotiates options such as packet size and whether authentication is required.
- Authentication: if required, the peers authenticate, historically with PAP or CHAP, and today often with EAP-based methods.
- Network configuration: Network Control Protocols (NCPs), such as IPCP for IP, assign addresses and configure the network layer.
- Data transfer: traffic flows across the link, framed in a format similar to HDLC.
- Termination: either side can close the link cleanly.
PPP also supports error detection and can bundle several physical links into one logical link (Multilink PPP).
PPP vs. PPPoE and PPTP
PPPoE carries PPP frames over an Ethernet network, which lets internet providers reuse PPP's authentication and accounting on broadband. PPTP is a VPN protocol that tunnels PPP over IP networks. Both build on PPP rather than replacing it.
Why does PPP matter?
PPP is still used on some broadband, WAN, and legacy links, so its authentication settings matter. Older methods like PAP send credentials in plaintext, and PPP itself does not encrypt traffic. Choosing stronger authentication, protecting the credentials used on these links, and encrypting sensitive traffic at a higher layer keep PPP connections from becoming a weak point.
Frequently asked questions
What is PPP?
PPP (Point-to-Point Protocol) is a protocol for linking two systems together directly, commonly used for dial-up, some broadband (PPPoE), and WAN connections.
Does PPP encrypt traffic?
Not by default. PPP frames and carries data but does not encrypt it, so sensitive traffic should be protected by encryption at another layer.
What authentication does PPP use?
PPP can use PAP, CHAP, or EAP-based methods. PAP sends credentials in plaintext and is the weakest option.
Manage every connection type from one place
Centralize every type of remote connection your team uses in one platform.
Related terms
Point-to-Point Tunneling Protocol (PPTP)
Point-to-Point Tunneling Protocol (PPTP) is a protocol for establishing a virtual private network (VPN) as an extension of a network.
Read now →Password Authentication Protocol (PAP)
Password Authentication Protocol (PAP) is a method of authenticating with plaintext credentials, considered vulnerable when used in Point-to-Point Protocol (PPP) connections.
Read now →Protocol
A protocol is a formally standardized or widely accepted set of rules or procedures for formatting, exchanging, and transmitting data between devices.
Read now →